Winix ZERO-N User Manual


English ZERO-N
PARTICLE SENSOR CARE
Particle Sensors Care
For optimal performance of the Particle Sensor, which detects airborne dust and
ultrafine particles, clean it every two months. Clean it more frequently when the unit is
running in a place with high dust levels.
①
Open the Particle Sensor cover.
②
Use a damp cotton swab to wipe the lens
and intake area of the Particle Sensor.
ˍ
To clean the sensor area, use only water.
Do not use volatile substances such as
alcohol or acetone
Lens
Cotton swab
③
Wipe away any remaining moisture with a
dry cotton swab.
④
Close the Particle Sensor cover.
ˍ
The Particle Sensors cover may be
cleaned using a vacuum cleaner
ZERO-N.indb 16 2018-04-26 오후 5:38:56

Winix ZERO-N Specifications

General

Noise level	47 dB
Certification	CE, RoHS, WEEE
Automatic mode	Yes
Air purify rate	- m³/h
Number of speeds	3
Suitable for room area up to	15 m²
Product color	Grey, White
Built-in display	No
Power consumption (max)	40 W
Filtering capability	Cigarette smoke, Fine dust, Pollen

Weight and Dimensions

Depth	207 mm
Width	350 mm
Height	470 mm
Weight	6200 g