Worx landroid wg791E User Manual

Lawn Mowing Robot EN
13
(14) to be kept in good condition to cut at its best. The Landroid
®
M
can do most things by itself, but will need your help sometimes to
prevent damage to itself.
• Never let the Landroid
®
M travel over gravel.
• Remove or block off obstacles that the Landroid
®
M could
accidentally climb on and damage its Blade Turning Disc.
• Remove all debris and foreign objects from your lawn.
4. Boundary Wire Basics
4.1 Pegging the Boundary Wire
Use the Boundary Wire Distance Gauge (24) to set the correct
distance from the border of your lawn (More than 35cm *).
* This is the recommended distance. Use the provided distance
gauge to ensure proper installation.
If your neighbor also uses a Landroid
®
M, then you must keep a
spacing of at least 2 metres between your Boundary Wire and your
neighbors.
Please be aware that your Landroid
®
M will not be able to receive a
signal from the Boundary Wire beyond the distance of 18m.
The boundary wire must outline the intended mowing area
exactly.
Your Landroid
®
M will become confused by extra bends or
coils of Boundary Wire that are not part of its mowing area ( See Fig.
H). If there is excess Boundary Wire after the mowing area has been
outlined, then cut it off and store this additional wire in a separate
location. However, it is important to leave the necessary length
where it connects to the Charging Base so it can be connected and
still remain buried.
4.2 Burying the Boundary Wire
We recommend that you bury your boundary wire a few centimeters underground. This will ensure trouble-free operation
year after year, season after season. For burying the Boundary Wire you may purchase the optional WORX Territorial Marker
Tool accessory at the same store that sold you your Landroid
®
M.
If you are planning to bury the Boundary Wire then it should be noted that when entering its Charging Base for the first
time, your Landroid
®
M may find problems with the way you have laid the wire. It is recommended to first peg down the
Boundary Wire to the lawn so it is easy to make adjustments if necessary. This will allow the Landroid
®
M to become
adjusted to its new environment and ensures it will successfully work with the charging base before the Boundary Wire is
buried.
When you have completed installing the boundary wire, it is recommended that you ask Landroid
®
M to follow the boundary
wire by pressing the home button.
Whilst observing Landroid
®
M locating the charging station you can
then make alterations to the boundary wire route to ensure trouble
free tracking of the boundary wire by Landroid
®
M when locating the
charging station.
4.3 Joining the Boundary Wire
The Boundary Wire (21) can be extended simply by splicing the ends
and connecting it to the ends of another piece of wire. You can use
insulating tape to secure the joined part of the wire. (See Fig. I)
H
I
G

Worx landroid wg791E Specifications

General

Type	Robotic lawn mower
Cutting width	180 mm
Cutting system	-
Recommended lawn area	1000 m²
Maximum cutting height	60 mm
Minimum cutting height	20 mm
Grass collecting volume	- L
Charging time	1.5 h
AC input voltage	28 V
Battery capacity	2 Ah
Cordless	Yes

Weight and Dimensions

Weight	- g