Worx WG583E User Manual

19
l
ess Blower/Vac/Mulcher
W
G583E WG583E.9
Cordless Blower/Vac/Mulcher
WG583E WG583E.X
COMPONENT LIST
1. HANDLE
2. ONOFF SWITCH
3. HIGHLOW SPEED CONTROL BUTTON
4. TUBE RELEASE BUTTON
5. BLOWER TUBE
6. BLOWER TUBE NOZZLE
7. BATTERY PACKS*
8. ANTISTATIC STRIP
9. UPPER VACUUM TUBE
10. LOWER VACUUM TUBE
11. WHEELS
12. LEAF COLLECTION BAG
13. FAN HOUSING COVER
14. BATTERY PACK RELEASE BUTTON

SEE FIG. C
15. BATTERY INDICATOR LIGHT SEE FIG.D
*Not all the accessories illustrated or described are
included in standard delivery.
TECHNICAL DATA
Type WG583E WG583E.X (5 -designation of
machinery, representative of Cordless Blower)
WG583E WG583E.X**
Rated voltage 40 V MAX(2x20 V MAX)***
Blow speed Max. 335 km/h
Vacuum capacity Max. 575 m
3
/h
Mulching ratio 121
Collection bag
capacity
35 L
Machine weight
(bare tool)
2.9 kg
** X=1-999A-ZM1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category
Type Capacity
20V Battery
WA3553 4.0Ah
20V Charger
WA3883 4.0A
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice
NOISE INFORMATION
A weighted sound pressure L
pA
: 84.7 dB(A)
A weighted sound power L
wA
: 99.7 dB(A)
K
pA
&K
wA
:3.0 dB(A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration a
h
<2.5 m/s
2
Uncertainty K=1.5 m/s
The declared vibration total value may be used for
comparing one tool with another, and may also be used
in a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the

Worx WG583E Specifications

General

Brand	Worx
Model	WG583E
Category	Blower
Language	English