14
Cordless Lawn Mower
WG779E WG779E.X
COMPONENT LIST
1. SAFETY KEY
2. SWITCH LEVER
3. CABLE CLIP
4. UPPER HANDLE
5. LOWER HANDLE
6. BATTERY POWER INDICATOR
7. BATTERY PACK COVER
8. CUTTING HEIGHT ADJUSTMENT KNOB
9. CARRY HANDLE
10. HANDLE KNOB, LOWER
11. SAFETY FLAP
12. GRASS COLLECTION BAG
13. BAG HANDLE
14. GRASS BAG INDICATOR
15. HANDLE KNOB, UPPER
16. BATTERY PACK*(SEE FIG. E)
17. BLADE BOLT (SEE FIG. N1)
18. BLADE (SEE FIG. N1)
*Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type WG779E WG779E.X (770-789 -
designation of machinery, representative of
Cordless Lawn Mower)
WG779E WG779E.X**
Rated voltage
40V
Max.
(2x20V Max.)***
No load speed 3300 / 3500/min
Cutting diameter 34cm
Cutting height
20-70mm
Cutting height
positions
6
Front wheel
diameter
160mm
Rear wheel diameter 180mm
Grass collection
capacity
30L
Battery type Lithium-Ion
Machine Weight
(bare tool)
10.4 kg
** X=1-999, A-Z, M1-M9 there are only used for dif-
ferent customers, there are no safe relevant changes
between these models.
***Voltage measured without workload. Initial bat-
tery voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
Category Type Capacity
20V Battery
WA3551 2.0 Ah
WA3572 2.5 Ah
WA3553 4.0 Ah
WA3014 4.0 Ah
20V Charger
WA3772 2.0 A
WA3883 4.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE DATA
A weighted sound pressure
L
pA
: 76.5dB(A)
K
pA
: 3dB(A)
A weighted sound power
L
wA
: 87.76dB(A)
L
wA
: 3dB(A)
Wear ear protection.
VIBRATION INFORMATION
Typical weighted
vibration
a
h
=3.246m/s
2
uncertainty K=1.5m/s²
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.