EasyManuals Logo
Home>Xerox>Printer>6000V_B

Xerox 6000V_B User Manual

Xerox 6000V_B
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Safety
Phaser 6000/6010 Color Printer
User Guide
8
Electrical Safety
General Guidelines
Note: Leave the printer on for optimum performance; it does not pose a safety hazard. If, however,
you do not use the printer for an extended period, turn it off and unplug it.
The following are hazards to your safety:
The power cord is damaged or frayed.
Liquid is spilled into the printer.
The printer is exposed to water.
The printer emits smoke, or the surface is unusually hot.
The printer emits unusual noise or odors.
The printer causes a circuit breaker, fuse, or other safety device to activate.
If any of these conditions occur, do the following:
1. Turn off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative.
Power Cord
Use the power cord supplied with your printer.
Plug the power cord directly into a grounded electrical outlet. Make sure that each end of the cord
is securely connected. If you do not know if an outlet is grounded, ask an electrician to check the
outlet.
Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have
a ground connection terminal.
Only use an extension cord or power strip designed to handle the electrical current capacity of the
printer.
Verify that the printer is plugged into an outlet that provides the correct voltage and power. Review
the electrical specification of the printer with an electrician if necessary.
Do not place the printer in an area where people can step on the power cord.
Do not place objects on the power cord.
Replace the power cord if it becomes frayed or worn.
WARNING: Do not push objects, including paper clips or staples, into slots or
openings on the printer. Contact with a voltage point or shorting out a part could
result in fire or electrical shock.
WARNING: Avoid the potential of electrical shock by ensuring that the printer is
properly grounded. Electrical products can be hazardous if misused.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox 6000V_B and is the answer not in the manual?

Xerox 6000V_B Specifications

General IconGeneral
BrandXerox
Model6000V_B
CategoryPrinter
LanguageEnglish

Related product manuals