EasyManuals Logo

Xerox Adaptive CMYK+ Kit User Manual

Xerox Adaptive CMYK+ Kit
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background image
Power Cord Safety Information
Before operating the press, read the following instructions carefully. For details, contact your Xerox
representative.
WARNING:
The electrical supply for the device must meet the requirements stated on the data plate on
the rear of the device. If you are not sure that your electrical supply meets the requirements,
consult your local electricity provider or a licensed electrician.
Do not use an extension cord.
Do not remove or modify the power cord.
Refer to these instructions to ensure the continued safe operation of the press.
Use the power cord supplied with the press.
Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end of the
cord is connected securely. If you do not know if an outlet is grounded, ask an electrician to check
the outlet.
Do not use a ground adapter plug to connect the press to an electrical outlet that does not have a
ground connection terminal.
WARNING: Avoid the potential of electrical shock by ensuring that the press is
grounded properly. Electrical products can be hazardous if misused.
Verify that the press is plugged into an outlet that provides the correct voltage and power. Review
the electrical specification of the press with an electrician, if necessary.
Do not place the press in an area where people can step on the power cord.
Do not place objects on the power cord.
Replace the power cord if it becomes frayed or worn.
Do not unplug or plug the power cord while the press is powered on.
To avoid electrical shock and damage to the cord, grasp the plug when you unplug the power cord.
Ensure that the electrical outlet is near the press and is easily accessible.
The power cord is attached to the press as a plug-in device on the back of the press. If it is necessary
to disconnect all electrical power from the press, disconnect the power cord from the electrical outlet.
For details, refer to Powering Off the Press.
8
Xerox
®
Adaptive CMYK+ Kit for the Xerox
®
Versant
®
180 Press
Accessory Reference Guide
Safety

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Adaptive CMYK+ Kit and is the answer not in the manual?

Xerox Adaptive CMYK+ Kit Specifications

General IconGeneral
BrandXerox
ModelAdaptive CMYK+ Kit
CategoryPrinter Accessories
LanguageEnglish

Related product manuals