Xerox DocuMate 6480 User Manual

Xerox
®
DocuMate
®
6460 / 6480 Maintenance
32 User Guide
Adjusting the Paper Guides
The paper guides are designed to release from the channel in the scanner body. This prevents
damage to the paper guides while performing maintenance or removing the input tray. When
following the instructions in this section for troubleshooting and maintaining the scanner, please
make sure the paper guides are fully seated before closing the scanner.
Check the position of the paper guides in your scanner compared to the following illustration. If
the end of the paper guide is flipped over similar to the image, follow the instructions below for
properly seating the paper guides.
To reset the paper guides:
1. Rotate the end of the paper guide and align the tab with the channel in the scanner.
2. Gently press on the paper guide to lock the paper guide in the scanner.
3. You can close the scanner when both paper guides are properly seated in the scanner.

Xerox DocuMate 6480 Specifications

General

Media thickness (min)	1.25 mm
Maximum scan area (ADF)	216 x 5994 mm
Minimum scan area (ADF)	51 x 51 mm
Scanning media types supported	Photo paper, Plastic Card
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	75 - 90 g/m²
Scanner type	ADF scanner
Product color	Blue, White
Built-in display	Yes
Auto document feeder (ADF) input capacity	120 sheets
Film scanning	No
Maximum scan size	241 x 5994 mm
Output color depth	24 bit
Output grayscale depth	8 bit
Output monochrome depth	1 bit
ADF scan speed (b/w, A4)	80 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	160 ipm
Sensor type	CCD
Scan drivers	ISIS, TWAIN, WIA
Daily duty cycle (max)	10000 pages
USB version	3.2 Gen 1 (3.1 Gen 1)
Standard interfaces	USB 3.2 Gen 1 (3.1 Gen 1)
Cables included	AC, USB
Minimum RAM	2048 MB
Minimum processor	Intel Pentium IV
Minimum storage drive space	350 MB
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1
Sustainability certificates	ENERGY STAR
Power supply type	AC
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	168 mm
Width	316 mm
Height	191 mm
Weight	4700 g