Xerox DocuPrint P8e User Manual

DocuPrint P8ex User Guide
1-12
ENGLISH
Software Utilities Installation
For full details on the printer software, consult the Reference Guide on the DocuPrint P8ex CD-ROM.
Installing the USB Port Driver
(Windows 98)
Installing the RCP and SM
(Windows)
The USB port driver must be installed in order to print
to the DocuPrint P8ex via a USB connection. Currently,
USB printing is only available through Windows 98.
1
Insert the Xerox DocuPrint P8ex CD-ROM into your
CD-ROM drive. If Windows automatically runs the
CD-ROM, skip to Step 3.
2
Select Run from the Start menu. Type d:\setup.exe on
the command line (where “d” is your CD-ROM drive
letter), then click OK.
3
Select the appropriate language, then select USB Port
Driver.
Installing the Xerox Font Manager
(Windows)
The Xerox Font Manager is a Windows-based utility
that allows you to install, load and manage fonts on the
DocuPrint P8ex.
1
Insert the Xerox DocuPrint P8ex CD-ROM into your
CD-ROM drive. If Windows automatically runs the
CD-ROM, skip to Step 3.
2
For Windows 95/98/NT 4.0:
Select Run from the Start menu. Type d:\setup.exe on
the command line (where “d” is your CD-ROM drive
letter), then click OK.
For Windows 3.1x:
Open the Program Manager and select Run from the
File menu. Type d:\setup16.exe on the command line
(where “d” is your CD-ROM drive letter), then click
OK.
3
Select the appropriate language, then select the Font
Manager.
The RCP (Remote Control Panel) and the SM (Status
Monitor) software are Windows-based programs that
allow the user to set default printer values as well as
monitor the status of the printer.
These two utilities can only be used when the printer is
connected via the parallel interface.
1
Insert the Xerox DocuPrint P8ex CD-ROM into your
CD-ROM drive. If Windows automatically runs the
CD-ROM, skip to Step 3.
2
For Windows 95/98/NT 4.0:
Select Run from the Start menu. Type d:\setup.exe on
the command line (where “d” is your CD-ROM drive
letter), then click OK.
For Windows 3.1x:
Open the Program Manager and select Run from the
File menu. Type d:\setup16.exe on the command line
(where “d” is your CD-ROM drive letter), then click
OK.
3
Select the appropriate language.
4
For Windows 3.1x, 95 and 98, select RCP and SM. For
Windows NT 4.0, select RCP.
All manuals and user guides at all-guides.com

Xerox DocuPrint P8e Specifications

General

Brand	Xerox
Model	DocuPrint P8e
Category	Printer
Language	English