Xerox iGen Series User Manual

Operating the Xerox Production Media Cart (Nuvera)
Xerox Nuvera, iGen Production System Production Media Cart 25
Production Media Cart User Guide
Lifting the Stack from the iGen Stacker
1. Press the upper part of the elevation button to raise the height of the Cart until the bottom
of the cart clears the iGen Stacker.
2. Gently lift up on the paper stack clamp near the clamp post to free it for rotation. Lift it
high enough so that it will clear the top of the paper stack.
3. Rotate the clamp and position it over the paper stack.
Bottom of yellow tine is above the pallet
surface

Xerox iGen Series Specifications

General

Brand	Xerox
Model	iGen Series
Category	Office Equipment
Language	English