Xerox Phaser 3124 User Manual

Installing Printer Software in Windows
6
5 Select your printer and click Next .
NOTE : If your printer is not already connected to the
computer, the following window will appear.
• After connecting the printer, click
Next .
• If you don’t want to connect the printer at this time, click
Next , and No on the following screen. Then the installation
will start and a test page will not be printed at the end of the
installation.
• The installation window that appears in this User’s
Guide may differ depending on the printer and
interface in use.
6 Select the components to be installed and click Next .
NOTE : You can change the desired installation folder by
clicking [ Browse ].
7 After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click
Next .
Otherwise, just click
Next and skip to step 9.
8 If the test page prints out correctly, click Yes .
If not, click
No to reprint it.
9 Click Finish .
NOTE : After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 10.

Xerox Phaser 3124 Specifications

General

Color	No
Print technology	Laser
Maximum resolution	600 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	8 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	53 dB
Paper tray media types	Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizes	Folio
ISO A-series sizes (A0...A9)	A4
Power requirements	220 – 240 V, 50/60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	390 W
Power consumption (PowerSave)	6.5 W
Operating temperature (T-T)	10 - 32 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	358 x 298 x 253 mm