Xerox Phaser 4510 Advanced Features Guide

Printer Settings
Phaser® 4510 Laser Printer
4-11
5. In either the Tray 1 Mode or Tray 2-N drop-down list, select the appropriate setting.
6. Click the Save Changes button at the bottom of the page.
Setting the Duration of the Tray 1 Prompt or the Tray 2-N Prompt
The tray prompt settings specify the amount of time the prompt displays on the control panel
after paper is loaded in the trays. The tray prompt requests the user to confirm the current tray
setup or to specify the correct paper type and size.
To select a Tray 1 or Tray 2-N prompt setting, use one of the following options:
■ The printer’s control panel
■ CentreWare IS
Using the Control Panel
To select the tray prompt setting on the control panel:
1. Select
Paper Tray Setup, and then press the OK button.
2. Select either
Tray 1 Prompt or Tray 2-N Prompt, and then press the OK button.
3. Select the appropriate duration, and then press the OK button.
Using CentreWare IS
To select the tray prompt setting using CentreWare IS:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the General folder on the left navigation panel, and then select Printer Defaults.
5. In either the Tray 1 Prompt or Tray 2-N Prompt drop-down list, select the appropriate
setting.
6. Click the Save Changes button at the bottom of the page.
Duration Behavior
None Turns the tray setup prompt off.
Factory default for Trays 2-4.
30 Seconds Displays the tray setup prompt for 30 seconds after paper is
loaded in the tray.
Factory default for Tray 1.
Infinite Displays the tray setup prompt after paper is loaded in the tray
until a control panel selection is made. The printer will not print
until a selection is made.

Xerox Phaser 4510 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	43 ppm
Maximum internal memory	512 MB
Sound power level (standby)	28 dB
Sound pressure level (printing)	56.1 dB
Total input capacity	1350 sheets
Total output capacity	500 sheets
Maximum input capacity	1800 sheets
Maximum number of input trays	2
Multi-Purpose tray input capacity	150 sheets
I/O ports	Parallel (IEEE 1284), USB 2.0
Power supply type	220 V
Weight (imperial)	45.2 lbs
Power consumption (active)	675 W
Acoustic power emissions (active, print, copy or scan)	71.9 dB
Envelopes sizes	B5, C5, DL
Custom media width	76 - 216 mm
Maximum print size	216 x 356 mm
Custom media length	127 - 356 mm
Paper tray media types	Bond paper, Coated paper, Envelopes, Labels, Plain paper, Recycled paper, Transparencies
Paper tray media weight	64 - 216 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), index card, Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Wi-Fi	No
Supported network protocols (IPv4)	USB/Parallel, 10/100 Base-TX Ethernet
PCL fonts	81
Printer fonts	PCL, PostScript
Maximum duty cycle	250000 pages per month
Recommended duty cycle	25000 pages per month
Number of PostScript fonts	139
Number of print cartridges	1
Display	LCD
Certification	EMC Directive 89/336/EEC, FCC Part 15, Class B, Low Voltage Directive 73/23/EEC, RoHS 2002/95/EC
Operating temperature (T-T)	41 - 95 °F
Operating relative humidity (H-H)	15 - 85 %
Power consumption (standby)	80 W
Power consumption (PowerSave)	18 W
Package weight	49896 g
Standard interfaces	Ethernet, Parallel, USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Weight and Dimensions

Dimensions (WxDxH)	630 x 630 x 1194 mm