Xerox VersaLink B7030 Maintenance

Replace Staples in the Booklet Maker for the Office Finisher
1. Open the door.
2. If the staple cartridges are not visible, grasp the vertical panels on each side of the opening and
slide the staple cartridges to the center.
3. Hold the tabs on both sides of the staple cartridge, then pull the cartridge out of the finisher.
4. Remove the new stapler cartridge from its packaging. Hold the tabs on both sides of the new
staple cartridge, then reinsert the staple cartridge into the original position in the finisher.
Note: The booklet maker uses two staple cartridges. Booklet stapling requires that both staple
cartridges contain staples.

Xerox VersaLink B7030 Specifications

General

Brand	Xerox
Model	VersaLink B7030
Category	All in One Printer
Language	English