Getting Started WorkCentre
®
XXXX
User Guide 27
Describing the Finishing Devices
Office Finisher
• Holds up to 250 sheets of paper in the Top Tray, and up to 2000 sheets in the Stacker Tray.
• Paper weight 60 to 216 gsm (16 to 57 lb).
• The Office Finisher can collate, stack, staple and hole punch (if available) your output
depending on the features selected. It staples between 2 and 50 sheets of 80 gsm (20 lb)
paper, less if using heavyweight paper or tabs.
• The finisher stapler has 1 staple cartridge containing 5000 staples.
• This finisher can be fitted with the optional 2, 3 or 4 Hole-Punch kit.
New Office Finisher Booklet Maker
• Holds up to 250 sheets of paper in the Top Tray, and up to 2000 sheets in the Stacker Tray.
• Paper weight 60 to 216 gsm (16 to 57 lb).
• The booklet maker can collate, stack, staple and hole punch (if available) your output
depending on the features selected. It staples between 2 and 50 sheets of 80 gsm (20 lb)
paper, less if using heavyweight paper or tabs.
• The finisher stapler has 1 staple cartridge containing 5000 staples.
• This finisher can be fitted with the optional 2, 3 or 4 Hole-Punch kit.
• The booklet maker can staple and fold up to 15 sheets of 80 gsm (20 lb) paper.
Identifying the Control Panel Buttons
1. Services Home: Provides access to the services available on the device.
2. Services: Returns the display to the previous Copy, Fax, or Scan feature screen when the Job
Status screen or Machine Status screen is displayed.
3. Job Status: Use to check the progress of active jobs, or display detailed information about
completed jobs.
4. Machine Status: Use to check the device status, the billing meters, the status of consumables,
or print the user documentation and reports. Use this button also when accessing the Tools
mode.
5. Touch Screen: Use to select programing features and display fault clearance procedures and
general device information.
To Next Page
Loading...
Need help?
General
