Name: Xerox WorkCentre 6027
Brand: Xerox
Rating: 4 (1 reviews)

Other manuals for Xerox WorkCentre 6027

User Guide226 pages

Quick Use Guide21 pages

Questions and Answers:

N
Nathaniel NelsonJul 27, 2025
Why does my Xerox WorkCentre 6027 reset frequently?
- T
  timothy11Jul 27, 2025
  If your Xerox All in One Printer resets or turns off frequently, here are a few things to check: * The power cord may not be properly connected. Turn off the printer, ensure the power cord is correctly plugged into both the printer and the outlet, and then turn the printer back on. * The printer might be connected to an uninterruptible power supply. Turn off the printer and connect the power cord to a suitable outlet instead. * The printer could be sharing a power strip with high-power devices. Plug the printer directly into the outlet or use a power strip that isn't shared with other high-power devices.
J
Joel RojasJul 31, 2025
Why Xerox WorkCentre 6027 All in One Printer does not turn on?
- J
  Joseph ManningAug 1, 2025
  If your Xerox All in One Printer doesn't turn on, there might be a few reasons: * The power switch might not be turned on, so ensure the switch is flipped to the 'on' position. * The power cord could be improperly plugged into the outlet. Turn off the printer and make sure the power cord is securely plugged into the outlet. * The outlet itself might have an issue. Try plugging another device into the outlet to see if it works. You can also try a different outlet altogether. * The printer might be connected to an outlet with incorrect voltage or frequency. Ensure the power source matches the specifications listed in the Electrical Specifications.
R
reynoldsrussellAug 11, 2025
Why is printing taking too long on my Xerox WorkCentre 6027 All in One Printer?
- J
  Jose StevensonAug 11, 2025
  If printing takes too long on your Xerox All in One Printer, here’s what might be happening: * The printer may be set to a slower printing mode, which is common for special paper types. Ensure that the paper type is correctly set both in the driver and at the printer control panel. * The printer could be in Power Saver mode. Wait for the printer to come out of Power Saver mode. * The network installation may be causing delays. Determine if a print spooler or a computer sharing the printer is buffering all print jobs and then spooling them to the printer. * The job might simply be complex. In this case, no action is needed other than waiting.

Xerox WorkCentre 6027 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 2400 dpi
Maximum Paper Size	8.5 x 14 in
Duplex Printing	Manual
Monthly Duty Cycle	30, 000 pages
Functions	Print, Copy, Scan, Fax
Paper Capacity	150 sheets
Processor Speed	525 MHz
Memory	512 MB
Connectivity	Ethernet, Wi-Fi
Mobile Printing	Apple AirPrint, Google Cloud Print