Xerox WorkCentre 7242 Setup Guide

Network Scanning Setup (Optional)
Copyright © 2007, Xerox Corporation. All rights reserved.
9
Network Scanning Setup (Optional)
Network scanning uses FTP or SMB protocols to transfer scanned documents on to a server
or a client. Templates (scanned file properties) and repositories (destination folders) need to
be set up to enable network scanning.
See also:
Interactive User Guide: Contains information on how to perform a network scan, as
well as information on how to set up templates and repositories.
System Administrator Guide: Contains details about Network Scanning setup.
Prerequisites for Network Scanning Setup
Confirm that:
1. An existing operational network utilizing TCP/IP is available.
2. A repository (folder) exists on the FTP or SMB server to hold the scanned documents.
A user account for the device must be created on the server that allows access to the
repository folder.

Xerox WorkCentre 7242 Specifications

General

Brand	Xerox
Model	WorkCentre 7242
Category	All in One Printer
Language	English