13
Power Adapter
Troubleshooting
Information Published
Manufacturer
Input Voltage
Efficiency at Low Load(10%)
No-load Power Consumption
Model Identifier
Input AC Frequency
Output Voltage
Output Current
Output Power
Value and Precision
Unit
100–240
2.0
24.0
A
W
Average Active Efficiency 89.09
83.11
0.070
%
%
W
V~
50/60 Hz
Zhongshan Baolijin Electronic Co., Ltd.
BLJ24W120200P-V
12.0 V
-
-
Fault
The fan doesn't work.
The fan is unable to connect
to Wi-Fi.
Fan blades are stuck.
The baery level indicator
does not light up.
Possible Cause Solution
The baery is depleted.
Fan blades are stuck by a foreign object.
The baery enters into sleep protection.
Unplug the fan and remove the foreign object.
Connect the fan to the charging base to activate the
baery.
The oscillation function
does not work.
The fan is under the auto-oscillation state.
Wait for the auto-oscillation completes. It will last for
14 seconds at most.
Charge the fan with the charging base.
The Wi-Fi connection is 5 GHz. Connect to a 2.4 GHz Wi-Fi network.
The stand does not properly connect to the fan base.
Child lock is enabled.
The fan has been offline for more than half an hour.
Reset the Wi-Fi connection.
Install the fan base with the stand correctly.
Disable the child lock function.
To Next Page
Loading...
Need help?
General
