Xiaomi MiJia User Manual

XIAOMI-MI.COM
2. Inserting and Removing the Battery and Memory
Card
1. To install the battery, open the battery compartment cover (see the
figure), contacts should point toward the lens, insert the battery; To
remove it, pull lightly by a special tape.
2. To install a Micro SD memory card, the side of the card with the label
should point toward the back of the camera, insert the card into the slot;
to extract, click on its upper part, after the memory card jumps out of the
slot, remove it.
Press the battery compartment cover
button, slide the cover to the side
(outward).
Micro SD.
Do not damage the tape to
remove the battery, this may
affect the convenience of
working with it.

Xiaomi MiJia Specifications

General

FOV	130°
Two-Way Audio	Yes
Power Supply	5V/1A
Type	Smart Camera
Image Sensor	CMOS
Video Resolution	1080p
Connectivity	Wi-Fi 802.11 b/g/n, 2.4GHz
Storage	MicroSD card
Resolution	1080p
Night Vision	Yes
Operating Temperature	-10°C to 50°C