Xiaomi Smart Air Purifier Elite User Manual

6
How to Use
Enabling & disabling plasma/UV sterilization
Resetting Wi-Fi
Tap the plasma on/off button to enable or disable
plasma sterilization. Tap and hold the plasma
on/off button for seven seconds to enable or
disable UV sterilization.
When connecting the purifier
to the app for the first time or
unable to connect to it, press and
hold the display on/off button for
7 seconds. The purifier will make
a notification sound once Wi-Fi is
successfully reset.
Child Lock Enabled
Child Lock Disabled
Enabling/disabling the child lock function
Press and hold the mode switch button for
7 seconds to enable or disable the child
lock function. The purifier will make the
corresponding notification sound and show
the corresponding icon on the display.
Tap the on/standby
button to turn on the
purifier. When the purifier
is on, tap the
on/standby button to
enter standby mode.
Press the display on/off
button to cycle through
its brightness levels: on,
dim, and off.
While the purifier is on, tap
the mode switch button to
cycle through modes.
On/Standby
Adjusting the
display's brightness
Switching mode

Xiaomi Smart Air Purifier Elite Specifications

General

Noise level	20.2 dB
Air purify rate	600 m³/h
Number of speeds	-
Bacteria removal rate	99 %
Suitable for room area up to	125 m²
Particle filtration	0.3 µm
Number of filter stages	3
Power consumption (max)	- W
Product color	Silver, White
Built-in display	No

Weight and Dimensions

Width	310 mm
Height	730 mm
Weight	6500 g