Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
96
HOOD CLEANING
As with any appliance, periodic maintenance is required. Many factors affect this schedule
such as product mix and hours of usage. An example schedule is included.
Your XLT hood is constructed of stainless and aluminized steel. Check application re-
strictions on product label prior to usage. Observe recommended precautionary and safety
measures as dictated by the product manufacturer. Bleach can cause stainless steel to discolor and
corrode and is not recommended for cleaning.
Do not use abrasive or caustic cleaners. Abrasive pads will scratch stainless steel surfaces.
Areas with heavy buildup should be sprayed and allowed to soak for up to five (5) minutes prior to
wiping clean. Always wipe with the “grain” of the surface to maintain appearance.
Shroud Panels can weigh up to 60 lbs [27 kg]. Use caution when lifting.
DO NOT spray liquid cleaning agents in the hood electrical box (located on front of
upper portion), or the User Interface (Located on front lower right corner).
Oven must be cool and the electric cord unplugged before any cleaning is done.
CAUTION
CAUTION
DANGER
To Next Page
Loading...
Need help?
General