XPower Easy Max User Manual

- 32 -
3. product appearance, dimensions and technical data
3.1.2 technical data
Element
specification
1 Power supply Single-phase or three-phase AC current (alternated) Three-phase AC current (alternated)
2
Input voltage 230 V AC oppure 400V AC 400 V AC
3
Frequency 50Hz o 60 Hz
4
Electric pump type Single-phase or three-phase Three-phase
5
Output frequency 20~50 Hz or 20~60 Hz
6
Pressure sensor 24 V 4-20 amA
7
Pressure sensor
interval
The selection may be 10 Bar, 16 Bar or 25 Bar
8
Pressure setting
interval
From 1.0 Bar to maximum pressure sensor interval * 90%
9
System
configuration
required
A hydrosphere greater than 4L must be used on the piping system
(internal pressure must be at 60% of the setting).
10
Room temperature (-10~+40) C°
11
Usable liquid Clean water at temperature from 0~+100
12
Startup delta for
automatic start
Factory settings are adjusted at 0.3 Bar
13
Configuration
requirements
Before using the product, make sure correct earthing has been performed
No.
2.2 KW 4.0 KW 5.5 KW 7.5 KW
GB

XPower Easy Max Specifications

General

Brand	XPower
Model	Easy Max
Category	Water Pump
Language	English