XVision Elite User Manual

1.Power Switch(Only the 4CH NVR)
Switch to turn the NVR ON & OFF.
2.VGA Output (Video Graphic Array)
15-pin D-sub connector for the analogue VGA output.
3.Audio Inputs
RCA connectors for the audio signal inputs. (Line In)
4.Power In
12V DC Power socket.
5.Alarm(Sensor) Inputs, RS-485, and Relay Output
 Alarm inputs x 4
 RS-485 Signals. (G: Ground, D+: RX/TX + signal,
D-: RX/TX- signal)
 4CH NVR: Relay output for the relay 1 (NO:
Normal Open, NC: Normal Closed, CM: Common)
 8&16CH NVR: Relay output for the relay 2 (NO:
Normal Open, NC: Normal Closed, CM: Common)
6.Rear USB 2.0(Only the 4CH NVR)
 USB 2.0 ports. Provides functions like ‘Copy to USB
storage’, ‘Mouse’ etc.
 7.DIGITAL VIDEO OUT
 Digital video output for the main monitor.
 8. CVBS Monitor Output
 Composite video output for the main live screen or the
spot screen. (BNC)
Rear panel view
89
10 13
4567
2
1112
13
[Rear panel of 4CH NVR]
1
23
4
5
6 78
9
10
111213
[Rear panel of 8 & 16CH NVR]
4
3 5
212
7
8910
11 513 14
[Rear panel of premium 8/16/32CH NVR]
Quick Guide
9.RJ-45 Network Port( 1G Base-T)
Network port is used for 1G base-T, PC application software or
Mobile application.
10. RJ-45 Local Port (1G Base-T)
Connection between IP camera and NVR through this port if using
local network already installed.
IP address will be automatically assigned as 192.168.172.100.
11.RJ-45 Cam(PoE) Port (100M Base-T)
Connection between IP camera and NVR as peer to peer mode (direc
t connection). IP address will be assigned in the range of 192.168.172
.101 ~ 8, automatically. (4CH NVR: 4port / 8&16 NVR: 8port)
12.Audio Outputs
RCA connectors for the audio signal outputs. (Line out)
13.POE Power In (48V)
DC Power socket for POE Power.
14.eSATA Connection Port(Optional)
Connect e-SATA storage to expand HDD

XVision Elite Specifications

General

Brand	XVision
Model	Elite
Category	Network Hardware
Language	English