EasyManuals Logo

Yaesu FT-23R MKII User Manual

Yaesu FT-23R MKII
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
FT-23R MKII OPERATING MANUAL8
Accessories
PA-6 MOBILE DC ADAPTER/CHARGER
FOR FNB-14 AND FNB-17
The PA-6 is a DC-DC adapter for use when operating the transceiver mobile, and for
charging the 7.2-volt FNB-14 and FNB-17 Ni-Cd battery packs. The PA-6 recharges a
completely discharged FNB-17 in about 15 hours, or trickle charges an FNB-14 (to full
charge in about 35 hours). Be careful to avoid overcharging, as the PA-6 does not include
a timer. The PA-6 cannot be used for charging the FNB-11H or FNB-12, as the charging
voltage is too low. Use only with 12-volt negative-ground electrical systems.
DRY-CELL BATTERY CASE
The FBA-17 dry-cell battery case may be used with six “AA” (UM-3) batteries, but these
provide only reduced power, and must not be with rechargeable cells (because they lack
the necessary safety circuits provided in the FNB series).
In some countries, one or more of above may be supplied with the transceiver. If you need
a battery, contact your nearest Yaesu dealer to purchase the desired battery pack or case.
We do not recommend the use of any other type of battery with the FT-23R MK
, and using
another type may affect your warranty.
CAUTION !
Never allow the terminals of the battery pack or case to be short-circuited!

Other manuals for Yaesu FT-23R MKII

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yaesu FT-23R MKII and is the answer not in the manual?

Yaesu FT-23R MKII Specifications

General IconGeneral
BrandYaesu
ModelFT-23R MKII
CategoryTransceiver
LanguageEnglish

Related product manuals