63FT-7800R OPERATING MANUAL
In the event of erratic operation of the transceiver, it is possible that data on the micropro-
cessor may have become corrupted. While this is a highly unusual situation, the only path ro
recovery may involve resetting of the microprocessor. Here’s how to do this:
1. Turn the radio off.
2. Press and hold in the
[
MHz
(
PRI
)]
key while turning the radio on.
3. Rotate the DIAL knob to select the resetting menu:
F-1 SETRST: Resets the Set (Menu) mode settings to their factory defaults.
F-2 HYPRST: Clears the Hyper Memory settings to factory defaults.
F-3 MEMRST: Clears the Regular Memory settings to factory defaults.
F-4 MB RST: Clears the Memory Bank Assignment.
F-5 ALLRST: Clears all memories and other settings to factory defaults.
4. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to complete the reset procedure,
once you have made your selection in step 3.
RESET PROCEDURE
To Next Page
Loading...
Need help?
General
