2-16
E
702035
000550
EMU01155
Throttle Friction Adjusting Screw
A friction device in the remote control box
provides adjustable resistance to movement
of the remote control lever, and can be set
according to operator preference. An
adjusting screw is located on the front of the
remote control box.
w
Do not overtighten the friction adjusting
screw. If there is too much resistance, it
may be difficult to move the lever, which
could result in an accident.
EMU00109
STEERING FRICTION ADJUSTING
SCREW (for Tiller control model)
A friction device provides resistance to
steering movement. This is adjustable for
operator preference. An adjusting
screw/bolt is located at right(starboard) side
of the through tube end on the clamp brack-
et.
Resistance Screw
Increase Turn clockwise
Decrease Turn counterclockwise
60H-9-E1-2 3/1/02 9:36 PM Page 17
To Next Page
Loading...
Need help?
General
