Name: Yamaha 2004 WaveRunner FX140
Brand: Yamaha
Rating: 5 (1 reviews)

To Next Page

To Previous Page

3-17

EJU01058

Jet unit

Carefully check the jet intake for weeds,

debris, or anything else that might restrict

the intake of water. If the intake is clogged,

cavitation could occur, reducing jet thrust,

and possibly damaging the jet pump.

In some cases, the engine may overheat

because of lack of cooling water, and dam-

age to the engine could result. Engine cool-

ing water is fed to the engine by the jet

pump. (See page 5-3 for jet intake cleaning

procedures.)

WARNING

●

Keep away from intake grate while

engine is on. Items such as long hair,

loose clothing, or PFD straps can

become entangled in moving parts

resulting in severe injury or drowning.

●

Stop the engine and remove the clip

from the engine shut-off switch before

removing any debris or weeds, which

may have collected around the jet

intake.

EJU01059

Engine shut-off cord (lanyard)

Check that the engine shut-off cord is not

frayed or broken. If the cord is damaged,

replace it; never try to repair it or tie it

together.

UF1B12.book Page 17 Monday, July 7, 2003 1:48 PM

Questions and Answers:

Need help?

Do you have a question about the Yamaha 2004 WaveRunner FX140 and is the answer not in the manual?

Yamaha 2004 WaveRunner FX140 Specifications

General