Instruments and indicators
48
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01593
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU36151
Water separator alert
This indicator will blink if water has accumu-
lated in the water separator (fuel filter) while
cruising. In such an event, stop the engine
immediately and see page 104 of this manu-
al to drain the water from the fuel filter. Get
back to the port soon and consult a Yamaha
dealer immediately.
ECM00911
Gasoline mixed with water could cause
damage to the engine.
EMU36161
Engine trouble alert
This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port
soon and consult a Yamaha dealer immedi-
ately.
ZMU05424
6CE-9-36-1E0.book 48 ページ ２０１４年１１月２８日 金曜日 午後２時５５分
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
Loading...
Need help?
General
