Operation
70
r/min. The display will show the engine
speed when the engine speed is increased
from the fully closed position during trolling
speed setting mode. When the throttle is re-
turned to the fully closed position, the display
will show the trolling speed again. When the
engine is turned off or when the engine
speed exceeds 3000 r/min, trolling speed
setting mode will be released.
For details, see the attached operation man-
ual.
Trolling is affected by currents and other
operating conditions and may differ from
the actual engine speed.
When warming up a cold engine, the troll-
ing speed cannot be decreased below the
specified engine idle speed.
EMU27822
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU41841
Procedure for stopping engine
1. The engine can be turned off either by
pressing the Start/Stop button or by turn-
ing the main switch to the “ ” (off) po-
sition. After the engine has been turned
off using the Start/Stop button, turn the
main switch to the “ ” (off) position.
SET
MENU
CANCEL
Troll stop
ZMU07256
6CE-9-36-1E0.book 70 ページ ２０１４年１１月２８日 金曜日 午後２時５５分
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
Loading...
Need help?
General
