Yamaha F40 User Manual

15
Specifications and requirements
EMU38092
Specifications
TIP:
“(AL)” stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
EMU2821Z
Dimension and weight:
Overall length:
1362 mm (53.6 in) (F30EHA, F30HA,
F40EHA, F40HA)
698 mm (27.5 in) (F30A, F40A)
Overall width:
384 mm (15.1 in)
Overall height S:
1228 mm (48.3 in) (F40A)
Overall height L:
1350 mm (53.1 in) (F30A, F30EHA,
F30HA, F40A, F40EHA, F40HA)
Motor transom height S:
414 mm (16.3 in) (F40A)
Motor transom height L:
536 mm (21.1 in) (F30A, F30EHA,
F30HA, F40A, F40EHA, F40HA)
Dry weight (AL) S:
94 kg (207 lb) (F40A)
Dry weight (AL) L:
102 kg (225 lb) (F30EHA, F40EHA)
105 kg (231 lb) (F30HA, F40HA)
98 kg (216 lb) (F30A, F40A)
Performance:
Full throttle operating range:
5000–6000 r/min
Rated power:
22.1 kW (30 HP) (F30A, F30EHA,
F30HA)
29.4 kW (40 HP) (F40A, F40EHA,
F40HA)
Idle speed (in neutral):
750–850 r/min
Power unit:
Type:
4-stroke SOHC L3 6 valves
Total displacement:
747 cm
3
(45.6 c.i.)
Bore  stroke:
65.0  75.0 mm (2.56  2.95 in)
Ignition system:
CDI
Spark plug (NGK):
DPR6EB-9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Steering system:
Remote steering (F30A, F40A)
Tiller handle (F30EHA, F30HA,
F40EHA, F40HA)
Starting system:
Electric starter
Starting carburetion system:
Fuel injection
Valve clearance IN (cold engine):
0.15–0.25 mm (0.0059–0.0098 in)
Valve clearance EX (cold engine):
0.25–0.35 mm (0.0098–0.0138 in)
Battery rating (CCA/SAE):
380–1150 A
Battery rating (MCA/ABYC):
502–1370 A
Battery rating (RC/SAE):
124 minutes
Battery rating (CCA/EN):
430–1080 A
Battery rating (20HR/IEC):
70 Ah
Maximum generator output:
17 A
Lower unit:
Gear shift positions:
Forward-neutral-reverse
6BG-9-3F-E0.book 15 ページ ２０１８年１１月１日 木曜日 午後５時１分
©2020 Yamaha Motor Corporation

Yamaha F40 Specifications

General

Brand	Yamaha
Model	F40
Category	Outboard Motor
Language	English