Recording Your Performance
P-115 Owner’s Manual
22
2
While holding down [REC], press the
desired Part button to engage Record
Ready mode.
If you want to change the value of the parameters
shared by two parts, select either part.
3
Press [REC] again to change the initial
settings and to exit from Record Ready
mode.
Song Playback and Practice of Each Part
All the Songs except for the Demo (page 17) let you turn on or off the [L] and [R] parts individually. By turning
off [R], for example, you can practice the [R] part while the [L] part is playing back, and vice versa.
1
Start playback of the desired Song.
To start the User Song, press [PLAY].
To start the Preset Song, press one of the C2 – C#6
keys to start playback while holding down
[DEMO/SONG].
For details on what Song number is assigned to
each key, see “Quick Operation Guide” (page 28).
2
While holding down [PLAY], press [L] or
[R] to turn the Part on/off.
3
Practice the part which is turned off.
4
Press [PLAY] to stop playback.
• In this status, do not press [PLAY] again or any key.
Otherwise, recording starts and the data will be
deleted.
C2
1st
Song
10th
Song
20th
Song
30th
Song
40th
Song
50th
Song
C3 C4 C5 C6
• Selecting another Song will cancel the on/off status of the parts.
To Next Page
Need help?
General
