Yamaha P-115 User Manual

Data Backup and Initializing
P-115 Owner’s Manual
24
By connecting a computer to the [USB TO HOST]
terminal, you can transfer data between the instrument
and the computer via MIDI.
For details on using a computer with this instrument,
refer to page 8 of the “Computer-related Operations”
on the website.
Data Backup and Initializing
The following data will automatically be maintained
as backup data even if you turn off the power.
Backup data
Metronome/Rhythm Volume, Metronome/Rhythm
selection (Beat or Rhythm number), Touch Sensi-
tivity, Tuning, Split Point, Pianist Style Volume,
Auto Power OFF, Damper Resonance on/off, IAC
on/off, IAC Depth, User Song, Intro/Ending on/
off, Operation Confirmation Sounds on/off, AUX
OUT volume settings
To save the User Song data to a computer:
Among the backup data listed above, only the User
Song (UserSong1.mid) can be transferred to a com-
puter and saved as a SMF file. For details, refer to
page 8 of the “Computer-related Operations” on the
website.
To initialize the backup data:
While holding down the C7 key (right-most key), turn
the power on to initialize the backup data to the fac-
tory initial settings.
Both the [REC] and [PLAY] lamps flash, indicating
that the initialization is being executed. After the
operation is completed, both lamps turn off.
Connecting to a computer
• Use an AB type USB cable. When connecting a USB cable, make sure that the
length is less than 3 meters.
Instrument
USB cable
Computer
[USB TO HOST] terminal
NOTE
Types of file that can be exchanged with a com-
puter
Songs:
• User Song (UserSong1.mid)
• Files with a .mid extension (SMF format 0 or 1)
• Never turn off the power while the initialization is being
executed.
• If this instrument somehow malfunctions or fails to operate properly, try initial-
izing the data as described above.
C7
NOTICE
NOTE
• Before you transfer an SMF file from a computer, make
sure to transfer the User Song to a computer for safe
keeping, since already-recorded data will be replaced
with the new transfer.
• Certain MIDI files in SMF format 0 or 1 may contain data that is not sup-
ported by your digital piano. In such a case, the files may not play as origi-
nally intended.
NOTICE
NOTE

Yamaha P-115 Specifications

General

Type	Digital Piano
Voices	14
Damper Resonance	Yes
Intelligent Acoustic Control (IAC)	Yes
Dual/Layers	Yes
Split	Yes
Duo	Yes
Number of Preset Songs	50
Compatible Data Format Playback	SMF (format 0, format 1)
Recording Format	SMF (format 0)
Metronome	Yes
Tempo Range	5 - 280
Transpose	-6 to 0, 0 to +6
Tuning	414.8 - 440.0 - 466.8 Hz
Touch Sensitivity	Hard/Medium/Soft/Fixed
Amplifiers	7 W x 2
Speakers	12 cm x 2
Weight	11.8 kg
Auto Power Off	Yes
Keyboard	88-key Graded Hammer Standard (GHS) keyboard
Polyphony	192 notes
Effects	Reverb, Chorus
Recording	2-track
Data Capacity	Approx. 100 KB per song (Approx. 11, 000 notes)
Dimensions	1, 326 mm x 295 mm x 163 mm
Power Supply	PA-150B or an equivalent recommended by Yamaha
Power Consumption	6 W (using PA-150 power adapter)
Connectivity	USB TO HOST, Sustain Pedal
Included Accessories	Music Rest, Pedal/Footswitch, AC Adaptor
Headphones	Standard stereo phone jack (x 2)