Selecting and Playing Styles
47
Adjusting the Accompaniment Volume
The playback volume of the accompaniment can be adjusted. This volume con-
trol affects only the style volume. The volume range is 000 - 127.
1
Select the Accompaniment Volume function in the Overall
menu.
Press the [OVERALL] button, repeatedly if necessary, until “ACMP VOL”
appears in the display.
2
Change the value.
Use the numeric keypad to set the desired Accompaniment Volume value
(000 - 127). You can also use the [+]/[-] buttons to increase or decrease the
value. Holding down either button continuously increases or decreases the
value.
1beat 2 3
1st measure
4 1234123412
2nd measure 3rd measure
33
...a fill-in pattern
plays immediately
until the end of the
measure...
...and the Main A
or B section
begins here.
If you press the
[MAIN/AUTO FILL]
button before beat
4...
...a fill-in pattern
plays from here...
...and the Main
A or B section
begins here.
If you press the
[MAIN/AUTO FILL]
button here, after
beat 4...
About the Fill-in Patterns
Current Accompaniment Volume value
Indicates Accompaniment
Volume is selected
ACMP
ON
TEMPO
ACMP VOL
110
116
• Accompaniment Volume cannot
be changed unless the Style
mode is active.
Restoring the Default Accom-
paniment Volume Value
If you’ve changed the Accompani-
ment Volume setting, you can
instantly restore the default setting
of “110” by pressing both [+]/[-]
buttons simultaneously (when
Accompaniment Volume is
selected).
To Next Page
Loading...
Need help?
General
