Yamaha YFM250 User Manual

8-41
8
6. Install the headlight bulb holder by pushing it
in and turning it clockwise.
7. Install the headlight bulb holder cover.
8. Connect the headlight coupler.
9. Place the headlight unit in the original posi-
tion, and then install the bolt.
10. Adjust the headlight beam if necessary.
EBU25561
Adjusting a headlight beam
NOTICE
ECB00690
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight beam
adjusting bolt in direction (a).
To lower a headlight beam, turn the adjusting bolt
in direction (b).
EBU25580
Replacing the tail/brake light bulb
If the tail/brake light bulb burns out, have a
Yamaha dealer replace it.
EBU25651
Removing a wheel
1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Do not touch the glass part of the bulb.
1
1. Headlight beam adjusting bolt
1
(a)
(b)
U1BT63E0.book Page 41 Friday, March 9, 2012 11:22 AM

Yamaha YFM250 Specifications

General

Brand	Yamaha
Model	YFM250
Category	Offroad Vehicle
Language	English