Yamaha YST-SW515 User Manual

11
This function automatically switches the unit between standby and power-on modes.
The subwoofer automatically places itself in standby mode if it does not receive an input signal for 7 or 8 minutes. (The
power indicator lights red.)
When the subwoofer detects a bass signal input of below 200 Hz, it automatically places itself in power-on mode. (The
power indicator lights green.)
1 Set the subwoofer to standby.
2 Change the AUTO STANDBY setting.
- LOW: Normally select this position to activate this function.
- HIGH: If this function does not operate with AUTO STANDBY switch set to LOW, select this position so that the
subwoofer detects input signals with a lower level and switches the power on automatically.
- OFF: Select this position to deactivate this function, for example, when the subwoofer switches the power on
unexpectedly by sensing noises from other appliances.
Notes:
• This function does not operate when the POWER switch is set to the OFF position, or when you manually set the
subwoofer to standby mode by pressing the STANDBY/ON button.
• Noise received from other appliances may extend the time period before the subwoofer places itself in standby mode to
more than 8 minutes.
AUTOMATIC POWER-SWITCHING FUNCTION
Changing the AUTO STANDBY setting
YST-SW515_UB.book Page 11 Wednesday, August 4, 2004 6:22 PM

Yamaha YST-SW515 Specifications

General

Subwoofer frequency range	20 - 160 Hz
Power consumption (standby)	0.5 W
Product color	Cherry (fruit)

Weight and Dimensions

Subwoofer depth	382 mm
Subwoofer width	350 mm
Subwoofer height	430 mm
Subwoofer weight	19000 g