Yamaha YZ450F(Y User Manual

4-44
KICK SHAFT AND SHIFT SHAFT
REMOVING THE KICK SHAFT
ASSEMBLY
1. Remove:
•Kick shaft assembly "1"
Unhook the torsion spring "2" from
the hole "a" in the crankcase.
REMOVING THE SHIFT GUIDE
AND SHIFT LEVER ASSEMBLY
1. Remove:
•Bolt (shift guide)
•Shift guide "1"
•Shift lever assembly "2"
The shift lever assembly is disassem-
bled at the same time as the shift
guide.
REMOVING THE SEGMENT
1. Remove:
•Bolt (segment) "1"
•Segment "2"
Turn the segment counterclockwise
until it stops and loosen the bolt.
If the segment gets an impact, it
may be damaged. Take care not to
give an impact to the segment
when removing the bolt.
CHECKING THE KICK SHAFT AND
RATCHET WHEEL
1. Check:
•Ratchet wheel "1" smooth move-
ment
Unsmooth movement→Replace.
•Kick shaft "2"
Wear/damage→Replace.
•Spring "3"
Broken→Replace.
CHECKING THE KICK GEAR, KICK
IDLE GEAR AND RATCHET
WHEEL
1. Inspect:
•Kick gear "1"
•Kick idle gear "2"
•Ratchet wheel "3"
•Gear teeth "a"
•Ratchet teeth "b"
Wear/damage→Replace.
CHECKING THE SHIFT SHAFT
1. Inspect:
•Shift shaft "1"
Bend/damage→Replace.
•Spring "2"
Broken→Replace.
CHECKING THE SHIFT GUIDE AND
SHIFT LEVER ASSEMBLY
1. Inspect:
•Shift guide "1"
•Shift lever "2"
•Pawl "3"
•Pawl pin "4"
•Spring "5"
Wear/damage→Replace.
CHECKING THE STOPPER LEVER
1. Inspect:
•Stopper lever "1"
Wear/damage→Replace.
•Torsion spring "2"
Broken→Replace.
INSTALLING THE SEGMENT
1. Install:
•Segment "1"
•Bolt (segment)
Align the notch "a" on the segment
with the pin "b" on the shift cam.
If the segment gets an impact, it
may be damaged. Take care not to
give an impact to the segment
when tightening the bolt.
INSTALLING THE STOPPER
LEVER
1. Install:
•Torsion spring "1"
•Washer "2"
•Stopper lever "3"
•Bolt (stopper lever) "4"
Align the stopper lever roller with the
slot on segment.
Bolt (segment):
30 Nm (3.0 m•kg, 22
ft•lb)
Bolt (stopper lever):
10 Nm (1.0 m•kg, 7.2
ft•lb)

Yamaha YZ450F(Y Specifications

General

Brand	Yamaha
Model	YZ450F(Y
Category	Motorcycle
Language	English