Page of 11
MAINTENANCE
• Maintain your acreage rake. It is recommended that the general condition of any acreage rake
be examined before it is used. Keep your acreage rake in good repair by adopting a program of
conscientious repair and maintenance. If any abnormal vibrations or noise occurs, have the
problem corrected before further use. Have necessary repairs made by qualified service
personnel.
• Oil moving parts from time to time with household lubricant.
RAKE TINE WHEEL MAINTENANCE:
Following these recommendations will make the raking wheels last longer.
1. It is recommended to mow or cut grass to 3” or less before raking or de-thatching.
2. Rake Wheel Tine Recommendation:
When in operating position, try adjusting the height of rake tine wheels so raking tines contact
ground lightly. Keep the lifting cable almost tight when operating if possible.
For deep raking or de-thatching, allow raking tines fully down on ground.
3. Rotate rake tine wheels from time to time:
Flip rake tines 180° as in Figure 15 for raking vs. de-thatching.
Remove rake wheel and fully turn around. This will keep tines from bending in one direction.
Since all grasses are different, you may need to rotate rake wheels more often when used in
thicker grasses.
For replacement parts and technical questions, please call 1-952-938-5222.
WARRANTY
One-year limited warranty
TG
PO BOX 202
Hopkins, MN 55343
Made in China
To Previous Page
Loading...
Need help?
General