11
ATTACHING GRASS DEFLECTOR (See Fig. 2 - 3.)
1. Remove supplied screw with a phillips screwdriver from the trimmer head.
2.
3.
4.
5. Install supplied screw and tighten by turning clockwise with a phillips screwdriver.
W A R N I N G
If any parts are damaged or missing, do not operate this product until the parts are replaced.
Failure to heed this warning could result in serious personal injury.
W A R N I N G
Do not attempt to modify this product or create accessories not recommended for use with this
leading to possible serious personal injury.
W A R N I N G
Do not connect to power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
UNPACKING
• This product requires assembly.
• Carefully remove the product and any accessories from the box. Make sure that all items
listed in the packing list are included.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected a
nd satisfactorily
operated the product.
• If any parts are damaged or missing, please call 1-888- 266-7096 for assistance.
PACKING LIST
• Trimmer Assembly
•
• Operator’s Manual
ASSEMBLY
To Next Page
Loading...
Need help?
General