Yealink MP54 Recovery Guide

Recovery Mode on Yealink IP phones
13
4. After a handset is registered, press (for W52P/W56P base) or (for W60B base) on the
handset to verify the current firmware version.
For W80DM/W80B
For the W80DM/W80B, there is no screen to show information for you. The W80DM/W80B uses
192.168.0.23 as its default IP address, so you need to configure a static IP address for your local PC
where you have the TFTP server installed.
Procedures:
1. Configure the static IP address on your local PC.
It must be configured as below:
2. Click OK twice to save the settings.
3. Long press and reconnect the power adapter to trigger the recovery mode.
The W80DM/W80B will download and upgrade the firmware from the TFTP server.

Yealink MP54 Specifications

General

Operating System	Android 9.0
Headset Port	RJ9
Display	4-inch capacitive touch screen
Audio Features	HD Voice, Acoustic Shield, Noise Proof Technology
Connectivity	Dual Gigabit Ethernet ports
PoE Support	Yes (IEEE 802.3af Class 3)
Bluetooth	Yes, Bluetooth 4.2
USB Port	Yes (1x USB 2.0)
Power Supply	PoE or External AC adapter (optional)
Audio Codecs	G.722, G.711
Microsoft Teams	Native Microsoft Teams application
Lines	1
Supported Protocols	SIP
Wi-Fi	Yes, Dual-band Wi-Fi (802.11a/b/g/n/ac)