EasyManuals Logo
Home>Yealink>IP Phone>SIP-T19P E2

Yealink SIP-T19P E2 User Manual

Yealink SIP-T19P E2
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Recovery Mode on Yealink IP phones
17
For CP960 IP Phones
This section is only applicable to CP960 IP phones.
Procedures:
1. Reconnect the PoE adapter.
2. Long tap the Home touch key when the touch screen prompts “Initializing…” to trigger the recovery
mode.
The IP phone will read and upgrade the firmware from the USB flash drive, and the touch screen
prompts “Firmware Updating”.
When upgrading successfully, the touch screen prompts “Initializing”.
3. If the IP phone fails to upgrade, the LCD screen will indicate the failure. You need to check and make
sure:
The file system of the USB flash drive should be FAT32.
The USB flash drive has been successfully connected to the IP phone.
The resource files are correctly renamed and placed on the USB flash drive.
Repeat the recovery mode procedures to try again.
The LCD screen prompts “Update failed (-1)” when failing to upgrade:
4. Tap Settings->General to verify the current firmware version after upgrading successfully.
. Update failed (-1) .

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T19P E2 and is the answer not in the manual?

Yealink SIP-T19P E2 Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Volume controlDigital
Integrated voicemailYes
Keypad number of keys29
Number of function keys6
Number of programmable keys7
Cables includedAC, DC, LAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.711, G.722, G.726, G.729B
Input current0.25 A
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.25 W
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts-
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Display diagonal2.3 \
Display resolution132 x 64 pixels
Security algorithmsHTTPS, MD5, SRTP
Networking standardsIEEE 802.1p, IEEE 802.1x
Ethernet LAN (RJ-45) ports2
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth143 mm
Width185 mm
Height38 mm
Package depth200 mm
Package width215 mm
Package height121 mm
Package weight996 g

Related product manuals