EasyManuals Logo
Home>Yealink>IP Phone>SIP-T19P E2

Yealink SIP-T19P E2 User Manual

Yealink SIP-T19P E2
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Recovery Mode on Yealink IP phones
8
3. Enter the desired values in the IP Address, Netmask, IP Gateway and HTTP Server fields
respectively.
Note
4. Press to complete the recovery mode.
The IP phone will download and upgrade the firmware from the HTTP server. After upgrading, the IP
phone will initialize successfully and get ready for use.
The LCD screen prompts “Initializing…Please Wait” when upgrading successfully.
Note
5. If the IP phone fails to upgrade, the LCD screen will indicate the failure. The user can repeat the
recovery mode procedures to try again.
For CP920 IP phones, you need to press the volume key ( or ) as the left or right
navigation key.
For SIP-T58A IP phones, you need to press / / as up/down/left/right
navigation key.
You need to press (for SIP-T58A phones), (for SIP-T3 IP phones) to complete the
recovery mode since there is no key.
. Initializing .
Please Wait
Welcome
10. 2. 11.124
255.255.255. 0
10. 2. 11.254
http://10.2.11.10
1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T19P E2 and is the answer not in the manual?

Yealink SIP-T19P E2 Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Volume controlDigital
Integrated voicemailYes
Keypad number of keys29
Number of function keys6
Number of programmable keys7
Cables includedAC, DC, LAN (RJ-45)
Number of handles included1 pc(s)
Voice codecsG.711, G.722, G.726, G.729B
Input current0.25 A
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.25 W
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts-
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Display diagonal2.3 \
Display resolution132 x 64 pixels
Security algorithmsHTTPS, MD5, SRTP
Networking standardsIEEE 802.1p, IEEE 802.1x
Ethernet LAN (RJ-45) ports2
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth143 mm
Width185 mm
Height38 mm
Package depth200 mm
Package width215 mm
Package height121 mm
Package weight996 g

Related product manuals