EasyManuals Logo
Home>Yealink>IP Phone>SIP-T23G

Yealink SIP-T23G User Manual

Yealink SIP-T23G
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
User Guide for the SIP-T23P/G IP Phone
134
2. Select the desired codec from the pull-down list of Multicast Codec.
The default codec is G722.
3. Click Confirm to accept the change.
Note
You can configure the phone to receive a Real Time Transport Protocol (RTP) stream from
the pre-configured multicast address(es) without involving SIP signaling. You can
specify up to 10 multicast addresses that the phone listens to on the network.
How the phone handles incoming multicast paging calls depends on Paging Barge and
Paging Priority Active parameters configured via web user interface.
Paging Barge
The paging barge parameter defines the priority of the voice call in progress. If the
priority of an incoming multicast paging call is lower than that of the active call, it will be
ignored automatically. If Disabled is selected from the pull-down list of Paging Barge,
the voice call in progress will take precedence over all incoming multicast paging calls.
Valid values in the Paging Barge field:
1 to 10: Define the priority of the active call, 1 with the highest priority, 10 with the
lowest.
Disabled: The voice call in progress will take precedence over all incoming paging
If G722 codec is used for multicast paging, the LCD screen will display the icon to
indicate that it is providing high definition voice.
Default codec for multicast paging is configurable via web user interface only.

Other manuals for Yealink SIP-T23G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T23G and is the answer not in the manual?

Yealink SIP-T23G Specifications

General IconGeneral
BacklightYes
Voice codecsG.711a, G.722.2, G.726, G.729ab, iLBC
Volume controlDigital
Handset typeWired handset
Product typeIP Phone
Product colorBlack, Silver
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Networking standardsIEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3af
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.56 W
Number of handles included- pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth188 mm
Width209 mm
Height150 mm

Related product manuals