Enterprise IP Phone Using the Basic Call Functions
Note:
When you are under the call hold status, putting down the handset, the conversation
will go on over the speaker instead of hanging up the call.
Call Waiting
This call feature allows your phone to accept other incoming calls to an extension
already in an active call.
To enable/disable Call Waiting via Phone interface:
1) Press Menu->Features->Call Waiting->Enter softkeys.
2) Use the navigation keys or Disable/Enable softkey to active/inactive call waiting.
3) Press Save softkeys to save the changes, or Back softkey to return to the previous
menu.
To enable/disable Call Waiting via Web interface:
Choose Phone->Features->Call Waiting to do the relating changes.
Call Transfer
You can customize your phone so that incoming calls are transferred directly to a third
party such as another extension, mobile phone number, etc.
There are two ways to
transfer the call: Blind Transfer and Attended Transfer.
To Blind Transfer via Phone interface:
1) Press Tran Button or Transfer softkey during the active conversation, the call will be
on hold, there will be a dial tone. Dial the other telephone number.
2) Hang up to complete the transfer.
3) You will be disconnected from the call.
To
Attended Transfer via Phone interface:
1) Press Tran Button or Transfer softkey during the active conversation, the call will be
- 27 -
To Next Page
Loading...
Need help?
General
Weight and Dimensions
