Wait a short moment without pressing any keys until the call is placed. As soon as the called party answers,
you can decide whether to transfer the call or not.
To transfer the call, simply press the key or hang up
In case the call transfer is refused, you can resume the call previously placed on hold earlier by first
pressing the Cancel soft key and then the Resume soft key
6.Conference calls (max 3 people)
During a conversation press the Conf soft key to place the incoming call on hold.
At this point you will hear a dial tone and you can enter the number of the person to add to the conference
call.
Press the Submit soft key. As soon as the called party answers, you can add it to the conference by simply
pressing the Conf soft key. To end the conference call, simply hang up the receiver thereby ending the call
with both parties.
7.Call waiting
Requirement: Call waiting must be activated as a feature on your phone. To enable/disable call waiting,
press the Menu soft key, select Functions using the directional key and confirm with the Next soft
key. Then select the 2
nd
call using the directional key and confirm with the Next soft key.
Using left/right directional key on the 2
nd
call you can enable/disable the feature. Confirm you
selection by pressing the Save soft key.
If a call is received during another call, the display will show the name or number of the caller and you will
hear two “beeps” at regular intervals. At this point you can decide whether or not to accept the new call or
place the previous one on hold.
7.1 Accepting Call Waiting
Press the Answer soft key, at this point the first call is placed on hold and you are connected with the second
5/9
To Next Page
Loading...
Need help?
General
