Yealink T26 User Manual

SERVICE PORT
Field name
explanation
Service Port
Web Server Type
Specify Web Server Type
HTTP Port
Set web browser port, the default is 80 port，if you
want to enhance system safety，you'd better change it
into non-80 standard port；
Example: The IP address is 192.168.1.70. and the port
value is 8090, the accessing address is
http://192.168.1.70:8090
HTTPS Port
Before using the https, you must download https
authentication certification into the phone, then
set web browser port, the default is 443 port，if you
want to enhance system safety，you'd better change it
into non-443 standard port. You can access to the web
in https after rebooting the phone.
Telnet Port
Set Telnet Port, the default is 23. You can change the
value into others.
Example: The IP address is 192.168.1.70. the telnet
port value is 8023, the accessing address is telnet
192.168.1.70 8023
RTP Port Range
Start
Set the RTP Start Port. It is dynamic allocation.
RTP Port Number
Set the maximum quantity of RTP Port, the default is
200.
Notice:
1) You need save the configuration and reboot the phone after set this page.
2) Please REBOOT the system if you modify the HTTP or telnet port
number (the new number should be greater than 1024.)

Yealink T26 Specifications

General

Brand	Yealink
Model	T26
Category	IP Phone
Language	English