| Headset Wear | 8
Note: For the dual headset, you can charge the headset after connecting it to your PC/phone via
the USB cable.
Connecting to Mobile Device via Bluetooth
You can connect the headset to your phone via the built-in Bluetooth to use as a Bluetooth headset.
Procedure
1. The headset enters the Bluetooth pairing mode.
• Unpacking for the first time (Bluetooth has not been paired): Press and hold the Mobile button for 3
seconds to enable the Bluetooth, and the headset enters the Bluetooth pairing automatically.
• Bluetooth has been paired: Press and hold the Mobile button for 5 seconds to enable the Bluetooth,
and the headset enters the Bluetooth pairing automatically.
The voice prompts "Bluetooth on, remaining talk time XX hours, pairing mode", then the headset
enters the Bluetooth pairing mode. The red and blue lights of the Mobile button will flash alternately
(500ms/time) after 2 seconds of the green light of the headset.
2. Enable Bluetooth on your mobile phone/IP phone/PC.
3. You can search and select the Yealink UH38 from the list of Bluetooth devices to pair with UH38.
The voice prompts "Mobile one connected" means that the connection is successful.
Tip: When you want to pair the headset with a new device (Device 2) after the headset has
been paired with a Bluetooth device (Device 1), and you need to disable the Bluetooth on Device
1 and can hear the voice prompts "Mobile one disconnected". Or you need to make sure that
Device 1 is not within the range of the headset and then connect to other devices.
Note: Yealink UH38 is the default device name. For Bluetooth compatibility information, please
refer to the specific compatibility guide.
Disable Bluetooth
When the headset is not on a call, you can press and hold the Mobile button for 5 seconds until the voice
prompts "Bluetooth off". After you disable Bluetooth, you can quickly disconnect the Bluetooth connection
of your headset from your Bluetooth device. For the mono headset, you only need to unplug the USB cable
and disable the Bluetooth.
Headset Wear
• Left or Right Wearing Style
• Adjusting the Microphone
• Clip the Microphone Cable on Clothes
Left or Right Wearing Style
Mono Headset
You can wear the headset on the left or right by flipping the microphone to the other side (300° limit).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
