Yitong Technology YTMC-51N2-M3 User Manual

YTMC-51N2-M3 MoCA 2.5 Adapter
2
Features
• Ethernet port (gigabit)
• MoCA (Coax In) coaxial port
• TV (TV/STB Out) coaxial port
• Power, MoCA, System and Ethernet LEDs:
- Power LED: glows solid green when Adapter is powered up.
- MoCA LED: glows solid green with connection on the MoCA port.
- System LED: glows solid green when the system is online.
- Ethernet LEDs: glows green for 1000Mbps link; glows yellow for 10/100Mbps
link; blinks when data is transferred across port.
Connecting the Adapters
Connecting the Adapter is a relatively simple process. First, connect one Adapter
to the TV or set-top box, the broadband modem or router, and the coaxial
network to establish the Internet signal. Then, additional Adapters can be installed
throughout the home or office at any location Ethernet Internet access is needed,
and an available coaxial port is available.
Connecting the First Adapter
The first Adapter must be connected to the TV or set-top box, the broad band
modem or router, and the coaxial network. This Adapter takes the Internet signal
from the modem/router and delivers it to the coaxial network, while keeping the
TV/set-top box connected.
To connect the first Adapter:
1. Remove the end of the coaxial cable connected to the TV or set-top box
from its coaxial wall port.
2. Connect the end of the coaxial cable removed in step 1 to the TV coaxial port
on the side of the Adapter

Yitong Technology YTMC-51N2-M3 Specifications

General

Brand	Yitong Technology
Model	YTMC-51N2-M3
Category	Adapter
Language	English