10. Setting Air Function
Press button until icon is displayed, then air function is turned on.
Press button until icon has disappeared, then air function is turned off.
When the indoor unit is connected with fresh air valve, air function setting can control the connection of
fresh air valve, which can control the fresh air volume and improve the air quality inside the room.
11. Setting Sleep Function
In unit on status, press SLEEP button to turn on or turn off sleep function.
When is displayed, sleep function is on.
When not displayed, sleep function is off.
Notes:
1. Sleep function can not be set in auto and fan mode;
2. When turning off the unit or switching mode, sleep function is cancelled.
12. Setting I FEEL Function
In unit on status, press I FEEL button to turn on or turn off I FEEL function.
When is displayed, I FEEL function is on.
When is not displayed, I FEEL function is off.
When I FEEL function is turned on, the unit will adjust temperature according to the temperature detected
by the remote controller to achieve the best air-conditioning effect. In this case, you should place
the remote controller within the valid receiving range.
13. Setting Timers
You can set the operation time of unit as you need. You can also set timer on and timer off in combination.
Before setting, check if the time of the system is the same as the current time. If not, please set the time
according to current time.
Setting Timer Off
1. Pressing TOFF button, “OFF” is blinking and time displaying zone displays the timer time of last setting.
2. Press or button to adjust the timer time.
3. Press TOFF button again to confirm setting. OFF is displayed and time displaying zone resumes to
display current time.
4. Press TOFF button again to cancel timer and OFF is not displayed.
Setting Timer On
1. Pressing TON button, “ON” is blinking and time displaying zone displays the timer time of last setting.
2. Press or button to adjust the timer time.
3. Press TON button again to confirm setting. ON is displayed and time displaying zone resumes to
display current time.
4. Press TON button again to cancel timer and ON is not displayed.
YAP1F REMOTE CONTROL FUNCTIONS
5
YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • info@ymgigroup.com • ymgigroup.com • 866-833-3138
M
I
N
I
S
P
L
I
T
S
•
V
R
F
•
P
T
A
C
•
S
O
L
A
R
•
L
E
D
L
I
G
H
T
I
N
G
Your Modern Green Idea
To Next Page
Loading...
Need help?
General
