YOKOGAWA Daqstation DX2010 User Manual

7-7
IM 04L42B01-01E
Customizing Actions Using the Event Action and Remote Control Functions (/R1 and /PM1 Options)
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
7.2 SetupExamplesofEventAction
Example1:Starting/StoppingtheMemorySamplingthroughRemoteControl
(/R1Option)
Starts/Stops the memory sampling when a signal is applied to remote control input
terminal 2. Use logic box number 1.
• SetupScreenandSetupItems
Press MENU (to switch to setting mode), and select the Menu tab > Timer,Event
action > Eventaction.
<Operation>
If the input to the remote control input terminal 2 is turned ON when memory sampling
is stopped, memory sampling starts. If the remote control input is turned OFF when
memory sampling is in progress, memory sampling stops.
Example2:WritingaMessageWhenanAlarmOccurs
Write the message “Channel 1 Alarm” to group 1 when an alarm occurs on channel 1.
Use logic box number 2.
• SetupScreenandSetupItems
Press MENU (to switch to setting mode), and select the Menu tab > Timer,Event
action > Eventaction.
<OtherSettings>
• Setanalarmtochannel1andoutputtointernalswitch3.
• Register“Channel1Alarm”inmessagenumber4.
For the procedure to set the alarm, see section 3.7.
For the procedure to set the message, see section 5.4.

YOKOGAWA Daqstation DX2010 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2010
Category	Recording Equipment
Language	English