D App Functions: Device Details Screen
I
Device type (Temp Humidity Sensor)
Device name
-Tap to edit the device name
Room
-Tap to assign a device to a room
Alert Settings
-Tap to set up alert range and alert
interval (page 12)
Calibration
-Tap to calibrate if you think the
readings are inaccurate (±9°F/±5%)
Recording Interval
-Device sampling frequency, 10 to 60
minutes setup is standard. More frequent
available by subscription
Favorite
-Tap the heart icon, the device will be
displayed on the Favorite tab
History
-Tap to view the device alert history
State
-Displays the current online/offline
state of the device
Model
-X3 Temperature Humidity Sensor
Model (YS8006-UC)
Device EUI
-Device’s unique ID number
SN
-Device’s unique serial number, tap to
save the device’s QR code, if desired
Signal Intensity
-Indicate how strong the signal is from
the nearest hub
Firmware
-Indicates the current firmware version. If
a second number is shown with the
words “Ready” there is a newer firmware
version available. Tap the word Ready to
start the update
Battery
-Shown red if batteries are low
12
To Next Page
Loading...
Need help?
General
