York NE240 User Manual

679948-YTG-A-0111
4 Unitary Products Group
APPLICATION FLEXIBILITY
MODELS 7-1/2 & 10 TON
The unit is built as a single cabinet with two condensate drain
pans. This allows the unit to be installed in either the vertical
or horizontal position for maximum flexibility.
On vertical applications, the air velocity across the cooling
coil keeps the condensate from dripping off the finned sur-
face onto the filters.
On horizontal applications, the unit must be installed with the
condensate drain pan under the entire cooling coil.
• The Supply Air Plenum and the Return Air Grill accesso-
ries can be used on either arrangement.
• The Base accessory can only be used on the vertical
arrangement.
When installed horizontally, the unit is designed for ceiling
suspension. Four 3/8"-16 weld nuts are provided in the angle
supports on the front of the unit (the side with the logo).
Knockouts are provided in the exterior panels for access to
these weld nuts. Hanger rods must be field supplied.
MODEL 15 TON
The unit has two distinct modules; a blower module and a coil
module. The unit is shipped in the vertical position with a ver-
tical air discharge as shown in illustration (a). The blower
module can be repositioned in the field as shown in illustra-
tions (b) and (c) for maximum flexibility.
• The Supply Air Plenum, Return Air Grill and Base acces-
sories can be applied on arrangement (a).
• The Return Air Grill and Base accessories can be
applied on arrangement (b).
• The Supply Air Plenum, Return Air Grill and Suspension
accessories can be applied on arrangement (c).
FIGURE 1 - VERTICAL AND HORIZONTAL
APPLICATION NE090 & NE/NF120
FIGURE 2 - VERTICAL AND HORIZONTAL
APPLICATION NE180
AIR
OUT
AIR
OUT
BLOWER
BLOWER MOTOR
COIL
RETURN AIR
DUCT FLANGE
AIR
IN
BLOWER
RETURN
AIR DUCT
FLANGE
AIR
IN
BLOWER MOTOR
FILTERS
COIL
(HORIZONTAL POSITION)
CONDENSATE DRAIN PAN
CONDENSATE
DRAIN CONNECTION
FILTERS
(VERTICAL POSITION)
CONDENSATE
DRAIN PAN
CONDENSATE
DRAIN
CONNECTION
(VERTICAL POSITION)
(HORIZONTAL POSITION)

York NE240 Specifications

General

Brand	York
Model	NE240
Category	Blower
Language	English