Page 5
Press the WARMER or COOLER buttons to modify the selection.
Setting the Clock
Quick Start
Press the SET CLOCK button. Adjust the clock using the WARMER or COOLER
Press the MODE button to advance and confirm through the setup steps.
During Setup and Programming:
buttons. Press MODE to advance to the day setting. Adjust the day using the
WARMER or COOLER buttons. Press the SET CLOCK button to confirm settings.
and Day
TIP: To adjust the time by hours press and hold the FAN button while pressing
the WARMER or COOLER buttons.
Selecting the Heat or Cool Mode
Select mode by pressing the MODE button.
Heating Only - The HEAT setting indicates the temperature the room has to reach
before the furnace will turn on to heat the room.
Cooling Only - The COOL setting indicates the temperature the room has to reach
before the air conditioner will turn on to cool the room.
Heating or Cooling (Auto-Changeover) - AUTO will automatically select heat or cool
based on room temperature demand.
OFF - OFF indicates both heating and air conditioning systems are turned off.
To Next Page
Loading...
Need help?
General
